May 2013
Do you think manufacturers should help buyers with certification when they import new or used machines from another region? (See Editorial)
SEE RESULTS »
March 2013
With our latest editorial in mind are you able to say “No” when it is the right thing to do?
SEE RESULTS »
January 2013
Should contractors specify prescriptive safety solutions for their sites or keep working for an industry solution/policy?
SEE RESULTS »
September 2012
Do you think that directors, owners or senior managers that have gone bankrupt three times should automatically be banned?
SEE RESULTS »
June 2012
Should industry associations make the reporting of all accidents a mandatory requirement of membership?
SEE RESULTS »
April 2012
Should the reporting of near-miss incidents be a mandatory requirement?
SEE RESULTS »
April 2012
Are anti-crush systems for booms essential? Should they be standard equipment?
SEE RESULTS »
February 2012
Do you think that United Rentals and RSC will be more successful as a merged business than if they had remained independent?
SEE RESULTS »
January 2012
Do you think that companies should pool payment/credit information?
SEE RESULTS »
November 2011
Do you think that we will see a US type access and crane rental market consolidation in Europe over the next few years?
SEE RESULTS »
October 2011
Having read the current editorial - do you think that the new penalties imposed on Notre Dame University are more appropriate than the original ones?
SEE RESULTS »
May 2011
Should all aerial lifts and cranes be subjected to a major 10 year strip-down inspection?
SEE RESULTS »
January 2011
Should personnel that carry out Thorough Examinations of lifting equipment – in-house or third party – be independently certified as competent?
SEE RESULTS »
November 2010
Should the use of belt type harnesses be sanctioned for use in certain circumstances such as short exhibition demonstrations and for third party truck drivers when loading?
SEE RESULTS »
October 2010
Will best practice standards and rules change things and save lives?
SEE RESULTS »
July 2010
Should manufacturers be able to block 'grey imports' of their products? whether new or used?
SEE RESULTS »
May 2010
If you visited Bauma what were your feelings after seeing the Liebherr stand?
SEE RESULTS »
May 2010
If you visited Bauma what were your feelings after seeing the Liebherr stand?
SEE RESULTS »
May 2010
Will the crane, lift or telehandler businesses ever be as good as they were in 2007?
SEE RESULTS »
November 2009
Should routine overload testing be dropped as part of a thorough inspection?
SEE RESULTS »
September 2009
There have been cases of rental company salesmen following competitor’s equipment deliveries to site. Is this acceptable?
SEE RESULTS »
March 2009
If you are a rental company, would you follow a lead set by larger companies to maintain rates?
SEE RESULTS »
January 2009
Should the testing and certification of operators for cranes, aerial lifts and telehandlers be mandatory?
SEE RESULTS »
January 2009
Should manufacturers encourage aerial lift users to get a PAL card?
SEE RESULTS »
January 2009
Looking at the photo in this editorial would you...
SEE RESULTS »
January 2009
Should the working hours of crane operators and erectors be controlled by law?
SEE RESULTS »
January 2009
Which of the two custom bikes do you prefer or rate as best?
SEE RESULTS »
January 2009
Do you offer outrigger mats on all self-drive crane and aerial rentals?
SEE RESULTS »
January 2009
should the use of outrigger mats be made mandatory on cranes & lifts?
SEE RESULTS »
January 2009
Are full overload devices on self propelled scissor lifts:
SEE RESULTS »
Grey imports are an irritant to many manufacturers, but are they not a by-product of non-tariff barriers and the absence of global standards?
![]() |
June 2013 |
| Advertise in Cranes & Access: MEDIA KIT » |
Do you think manufacturers should help buyers with certification when they import new or used machines from another region? (See Editorial)
| ASHTEAD GROUP | 626.00 | +0.48% |
| BOOM FPO | 0.11 | 0.00% |
| Caterpillar, Inc. | 84.84 | +0.34% |
| Essex Rental Corp | 4.36 | +2.35% |
| FAVELLE FAVCO BHD | 2.91 | +6.99% |
| Federal Signal Co | 8.92 | -1.44% |
| FINNING INTL | 22.54 | -0.27% |
| GALQ.MC | 0.00 | N/A% |
| H&E Equipment Ser | 22.81 | +0.80% |
| Harsco Corporatio | 23.56 | +0.26% |
| HAULOTTE GROUP | 6.57 | -0.76% |
| LAVENDON GROUP | 173.00 | +0.44% |
| LINAMAR CORP | 28.55 | -1.04% |
| Manitex Internati | 10.63 | +2.31% |
| MANITOU BF | 10.21 | -2.67% |
| Manitowoc Company | 19.37 | +0.89% |
| Oshkosh Corporati | 37.94 | +1.39% |
| PALFINGER | 23.63 | -1.19% |
| RRR | 0.00 | N/A% |
| SPEEDY HIRE | 56.81 | +2.83% |
| TANFIELD GRP | 24.35 | -6.35% |
| Tat Hong | 1.41 | +0.36% |
| Terex Corporation | 29.77 | +0.85% |
| Titan Machinery I | 19.73 | -0.75% |
| United Rentals, I | 51.77 | +0.23% |
| VP | 352.25 | -0.91% |
June 17, 2013
Crane operator arrested »
June 14, 2013
Hole in the road »
June 15, 2013
More MAN for Ainscough »
June 14, 2013
Suspended work at height »
June 13, 2013
Wagenborg Nedlift takes 750 tonne Liebherr »
June 18-21, 2013
Suisse Public »
Bern, Switzerland
June 26-27, 2013
Vertikal Days 2013 »
Haydock Manchester, UK
August 2, 2013
IPAF Asia Conference »
Singapore, Singapore
September 3-6, 2013
Offshore Europe 2013 »
Aberdeen, Scotland
September 4-8, 2013
Matexpo 2013 »
Kortrijk, Belgium
June 18, 2013
Full Time Engineer Required »
Burnley, UK
June 14, 2013
Crane Operator Wanted »
Edinburgh
June 12, 2013
Regional Sales Manager/in »
Region Norddeutschland
June 12, 2013
National Sales Executive »
England & Wales
June 7, 2013
Depot Manager/Hire Controller »
South East region
June 7, 2013
Project Manager »
Croydon
June 4, 2013
Service Engineers »
London, UK
June 4, 2013
Training Instructor »
Nationally UK
June 3, 2013
Crane Engineer »
Berks/Surrey/Kent
June 5, 2013
Spierings 6&7 Axle »
Midlands
March 6, 2010
Mini Crane operator seeks work »
UK based
Ritchie Bros Auctions
Click here for calendar