In order to view all images, please register and log in. This will also allow you to comment on our stories and have the option to receive our email alerts. Click here to register
25.11.2014

Wolf Haessler returns to access

Wolf Haessler, the founder and previous owner of Skyjack, has decided to dip his toe back into the access market with the introduction of most unusual machine that he is calling the Wolflift. He had considered using the name Wolfjack but was eventually advised against it.

The new machine has a platform height of six metres, and compact dimensions - being 800mm wide and just over 1.5 long - not too dissimilar to the better 19ft scissor lifts. However in all other respects if differs. It uses a massive four stage box section mast, driven by four electric motor driven rack and pinion drives. The regular scissor sized platform sits within the final section of the mast.
Please register to see all images

The stowed Wolflift


Propulsion comes from two vertically mounted electric motors, driving the wheels through an elaborate gearbox to allow the motors to sit almost at waist height. The concept machine was shown off at an open day in October, which we sadly missed. We do now have a few details though, along with a couple of photographs.

Haessler claims that the unusual machine is totally free of any hydraulics, so completely oil free and has greater platform rigidity than a regular scissor lift of the same size. One issue though might be the ‘sail area’ caused by its solid sides, at least for outdoor use. Maximum capacity was shown as 113kgs but we understand will be significantly higher as testing has not yet been completed. We also do not know yet if it will have an indoor and an outdoor rating to CE standards. Stowed height is a competitive 1.98 metres, with a step height of 458mm.
Please register to see all images

The extended Wolflift, certainly looks different



Vertikal Comment

Well it is certainly different, and might just offer some benefits, although the attraction of these 'benefits' will depend on the pricing and reliability of this machine. The old adage of “if it looks right it probably is right” will probably not apply to this machine, which may well put a lot of potential buyers off, even if it performs well.

It could though find a niche market, which might be as much as Haessler is looking for at this stage?

Comments