The impressive Multitel SMX250HD with 25.3 metres of working height, maximum outreach of 11.6 metres and platform capacity of 220kg with no restrictions to the working envelope.
A 1931 Smith Rodley crawler crane on the S E Davis & Son stand
A busy first day in glorious sunshine
A CMC S15 on the Overland stand
A Ford Ranger 4x4 with GSR platform on the SkyKing stand
The fully working 1931 Smith Rodley TwoTen (two tons at 10 feet) being demonstrated by owner Paul Davis
A piece of very inventive wood carving!
Access Platform Sales (APS) had a very busy stand with spiders from Hinowa and Omme as well as a Nifty 120T and Isoli truck mount
Affordable Access is also the CoMet distributor for the UK and was showing several machines including this platform with tipping chipper body on a 3.5 tonne chassis
Affordable Access was showing off its new Merlo 40.26 Roto telehandler with tree pruning attachment.
Almost at the top! Two competitors in the 25m poleclimbing competition
An Easy R180 spider on the Sky King stand
Another modified Unimog from EGD Services this time with an Easy Lift ETJ190 platform
Featured in last month's Arborist feature, Watmough's Forestry was showing off its modified 2150 Unimog with TP250 chipper on the rear and fittings for a Dücker flail on the front.
King unveiled this new range of Almac Italia crawler scissors with three models including the 410 with a platform height of 1.98m, the 2.98m 510 and the largest 4.3m 630 (above) with levelling tracks
Lots of log transporters and loaders were on show including this Palfinger Epsilon M120L on the Outreach stand
Pam Penny of the Vertikal Press with Melvyn Else of UK Multitel distributor Access Industries
Mark Caves of Promax Access showing off the latest Platform Basket 13.80 Hybrid
One of the highlights of the show is the 25m world poleclimbing championships with competitors completing the 'climb' (run up the pole) in about 11 seconds. Here a competitor gets ready before the start
Orange Plant was offering this used Oil&Steel 1401 Classic spider for £17,750
Paul Davis of S E Davis & Son driving a fully working and tested 1931 Smith Rodley Two Ten crawler crane
Rob Nash of Overland with one of six Toyota Hilux based platforms using the CMC ATP145 boom giving 14.5 metres working height and 7.8 metres outreach
Shaun Day of Promax with the Reedyk C3412 Compactcrane
Teupen's latest outrigger pad design
The APS stand
The Overland stand
A Multitel truck mount on 3.5 tonne chassis
The Platform Hire stand gang - (L-R) John Hall, Niall Ingleby, Chris Wrenn and Dom Chambers - with a Nifty SD210 and Multitel SMX250 spider and truck mount behind
The Promax Access stand
The Teupen Leo 21GT with specifically designed 3.5 tonne GVW transport
This Isuzu 4x4 based platform from Cumberland Platforms was fitted with a Socage A314 boom
Register today in order to add your own comment, it barely takes a minute.
Comments